-
Q How small mac adam ellipse can Ledodm supply?
A The minimum Ledodm Lighting is doing inside the company was 2.5 steps, standard price in the pricelist was around 4-5 steps, economic type will be at 6 steps.
-
Q How small color temperature ranges can Ledodm supply?
A | CCT | 2700K | 3000K | 4000K | 5000K | 6000K |
| Min Range | 2650-2750K | 2925-3075K | 4000-4200K | 5000-5300K | 6000-6300K |
| Typical Range | 2600-2800K | 2800-3200K | 4000-4500K | 5000-5500K | 6000-6500K |
-
Q Uniform Seamless light without visible dots
A One of the biggest complaints about traditional SMD LED strips is the lighting dot or dark area throughout the strip. A dark area is visible that the human eye cannot ignore because there's no light between two leds. It often happens even if there's aluminum profile cover. Light is more soft and attractive when it looks like a smooth light source rather than a lighting dot mess. This is the most significant advantage of COB LED Strip. Designed with hundrends of chips inside, Flex COB Strips provide uniform "a line" light without any visible dot or spot, even if there's no aluminum profile cover. COB flex strips is ideal for applications where cannot be hidden or diffusion cover distance is very close
-
Q Wider beam angle 180 degree
A SMD light strip luminous angle is 120 degrees, while the COB led tape light luminous angle is 180 degrees. COB strips typically provide an exceptionally wide beam angle of up to 180 degrees. This ensures even light distribution across surfaces, eliminating dark areas or shadows between light points, which is a common issue with spaced-out SMD LEDs.
-
Q What are lumens (lm)?
A Lumen is the measurement of brightness as perceived to the human eye. Because of incandescent lighting, we are all accustomed to using watts to measure the brightness of light. Today, we use lumen. Lumen is the most important variable when choosing which LED strip light you need to look at. Make sure you compare lumen output between LED strip lights before determining which one is best for your project.
-
Q What is AC?
A This is Alternating Current. This is the electricity that is used in most homes and commercial spaces. It’s often referred to as line voltage and number differs from country to country. US line voltage is typically 90V-220V, whereas it often averages higher in Europe.
-
Q What is DC?
A This is Direct Current. Most LED strips on the market use low-voltage DC. A transformer or low-voltage battery is often required to step-down the AC voltage to a suitable level for the LED strips, which is normally 12V or 24V DC.
-
Q What is LED pitch?
A LED pitch is the distance between the individual chips on a strip (FPCB). It is absolutely crucial to understand the importance that pitch plays in your project. The shorter the pitch, the more uniform the light tends to be and the less spotting you have.
