Newsletter: Flexible LED Light Sheet

Flex LED Sheet is ideally suited for counter and bar tops, curved surfaces, low clearance applications and situations where exact measurements are not known or likely to change. With high density LED, Light Sheets are specifically engineered to be a dimmable, field customizable solution for backlighting translucent materials. Cut LEDs from any part of the sheet to avoid obstacles without interrupting power to the rest of the sheet. Fold and shape over edges and around curvilinear shapes. Connect up to eight Light Sheets in any configuration needed, easily and quickly without soldering. 105LEDs/pcs, 210LEDs/pcs, 420LEDs/pcs are options for your choice.

FLEXIBLE LED SHEET FEATURE

• 1LED Cuttable

• 110Lumen/W 

• Bendable and Foldable

• CRI>80, Ra 90 Optional

• White, Warm White, Red, Green, Blue

• Single Bin LED with Epistar Chip

Cut Flex led sheet can be cut every one led, allows for on-site customization which can eliminate custom order lead times. When discrepancies occur between drawing specs and field measurements or when changes need to be made, on-site customization avoids delays.

Fold Fold and shape over edges and around curvilinear shapes. Add a seamless, uniform backlighting effect to translucent surfaces with multiple planes. The Flexible Circuit Board (FCB) can bend along both axes and diagonally.

Connect LED flexible sheets interconnect quickly and easily with included sheet-to-sheet connection wires. Connect up to eight sheets in any arrangement, integrated 2-pin connection blocks eliminate the need to solder and speed installation.

 

FLEXIBLE LED SHEET DIMENSION

SL-2835-105F

SL-2835-210F

SL-2835-420F

FLEXIBLE LED SHEET SPECIFICATION

Model No.	SL-2835-105F	SL-2835-210F	SL-2835-420F
LED Light Source	SMD2835
LED Chip QTY	105LEDs/pcs	210LEDs/pcs	420LEDs/pcs
Voltage	24V
Power	12W
CRI	80/90
Lumen	1350LM	1400LM	1450LM
PCB Thickness	2oz
PCB Size	500*233mm
PCB Color	White
Beam Angle	180°
Tape	3M 300LSE Tape on the Back
Cuttable Unit	33.33*33.33mm	23.8*23.3mm	16.67*16.67mm
Warranty	3 Years

FLEXIBLE LED SHEET ACCESSORIES

A: Clips

B: Connection Wire 60mm

C: Connection Wire 200mm

D: Power Lead 500mm

FLEXIBLE LED SHEET CONNECTION

Cable Management Clips (A): Route the connection wires so that the light from the LEDs is not blocked.

Short sheet-to-sheet Connector (B): When adjacent LED Light Sheets are mounted side-by-side with connection blocks aligned, the shorter sheet-to-sheet connection wires should be used to interconnect multiple sheets. When connecting Light Sheets that are already mounted to a fixed surface, the short connection wires will need to be shaped prior to pushing into connection blocks. Best practices include using two sheet-to-sheet connection wires for all adjacent Light Sheets in each circuit to minimize voltage drop. 

Long sheet-to-sheet Connector (C): Use the longer sheet-to sheet connection wires to bridge gaps and/or connect offset sheets.

Power Input Connector (D): Connect it with power supply.

FLEXIBLE LED SHEET POWER INPUT

FLEXIBLE LED SHEET APPLICATION