Shenzhen Ledodm Lighting Co., Ltd

Home » Product Categories » Flexible LED Light Sheet Backlight » Single Color Flex Light Sheet » 24V 420LEDs/pcs Flexible LED Light Sheets 500*233mm


Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

24V 420LEDs/pcs Flexible LED Light Sheets 500*233mm


24V 420LEDs/pcs Flexible LED Light Sheets 500*233mm

flexible led sheet

Flexible LED light sheet is ideally suited for counter and bar tops, curved surfaces, low clearance applications and situations where exact measurements are not known or likely to change. These flexible, field-customizable light sheets provide extremely uniform illumination behind the translucent material.

Flexible LED Light Sheets Feature

  • SDCM<3

  • 1LED Cuttable

  • Bendable and Foldable

  • CRI>80, Ra 90 Optional

  • Single Bin LED with Epistar Chip



Flexible led light sheet can be cut every one led, allows for on-site customization which can eliminate custom order lead times. When discrepancies occur between drawing specs and field measurements or when changes need to be made, on-site customization avoids delays.



Flexible led light sheet is easy to fold and shape over edges and around curvilinear shapes. Add a seamless, uniform backlighting effect to translucent surfaces with multiple planes. The flexible circuit board can be bend along both axes and diagonally.


Easy Connection

LED flexible sheets interconnect quickly and easily with included sheet-to-sheet connection wires. Connect up to eight sheets in any arrangement, integrated 2-pin connection blocks eliminate the need to solder and speed installation.


Flexible LED Light Sheets Connection

Cable Management Clips (A): Route the connection wires so that the light from the LEDs is not blocked.

Short sheet-to-sheet Connector (B): When adjacent LED Light Sheets are mounted side-by-side with connection blocks aligned, the shorter sheet-to-sheet connection wires should be used to interconnect multiple sheets. When connecting Light Sheets that are already mounted to a fixed surface, the short connection wires will need to be shaped prior to pushing into connection blocks. Best practices include using two sheet-to-sheet connection wires for all adjacent Light Sheets in each circuit to minimize voltage drop. 

Long sheet-to-sheet Connector (C): Use the longer sheet-to sheet connection wires to bridge gaps and/or connect offset sheets.

Power Input Connector (D): Connect it with power supply.

connection drawing

Flexible LED Light Sheets Power Input

flex led sheet light

24V 420LEDs/pcs Flexible LED Light Sheets 500*233mm

  • SDCM<3

  • Epistar Chip

  • Double-sided PCB

  • Cuttable for Easy Usage

Model No.SL-2835-420F
LED Light SourceSMD2835
LED Chip QTY420LEDs/pcs
PCB Thickness2oz
PCB Size500*233mm
PCB ColorWhite
Beam Angle180°
Tape3M 300LSE Tape on the Back
Cuttable Unit16.67*16.67mm
Warranty3 Years

24V 420LEDs/pcs Flexible LED Light Sheets 500*233mm

Wire for Flexible LED Light Sheet

led sheet light wire

Sheet-to-sheet connection wires for aligned 2-pin connection blocks, 20AWG, 60mm length

led sheet light cable

Sheet-to-sheet connection wires for staggered 2-pin connection blocks, 20AWG, 200mm length

led light sheet wire

Power lead with connector on one end and stripped on the other end, 20 AWG, 500mm length

Accessories for Flexible LED Light Sheet

led light sheet clip

Cable management clips with silicone adhesive backing

led light sheet accessory

Domed spacing bumpers with silicone adhesive backing

led sheet light wago

Splicing connectors, shunted - use to connect wires with same polarity

24V 420LEDs/pcs Flexible LED Light Sheets 500*233mm

 Flexible LED Light Sheets FAQ:

  • Q: What is the product warranty?

    The warranty on flexible led sheet lights is 3 years warranty;

  • Q: What is the product lifespan?

    Our led have been strictly tested and have passed LM80 within an expected lifespan of 50,000hours. 

  • Q: What is color temperature?

    Most white lights fall in a spectrum between 1800K and 6500K, measured in Kelvins (K). When dropping below 3000K, the light is noticeably warmer. When rising above 6500K, the lights have a blue-ish tint and cooler tone. We have 2700K 3000K 4000K 6000K for flexible led light sheet.

  • Q: What is product lumen?

    This is one way we can measure light output, the more lumen, the higher brightness. For flexible led sheet light, we use LED with 0.5w 65-70LM.

  • Q: What does IP meam?

    This is a rating system that defines the ability of led strip to be able to work in different environments. It is a measurement of the protection an item will have against solid objects and liquids. An IP rating is comprised of 2 numbers, the first one refers to the protection against solid objects and the second one refers to protection against liquids.

  • Q: What is CRI?

    Color Rendering Index (CRI) is the measurement of how colors look under a light source when compared with sunlight. The index is measured from 0-100, with a perfect 100 indicating that colors under the light source appear the same as they would under natural sunlight. CRI80 and CRI90 are both available for flexible led light sheet.

More Information on LED Strip Lights:

90% of our customers found this page useful in selecting their LED strips


Related Products

Product Inquiry

  Subscribe to our newsletters. Free Sample Available!

Single Color LED Strip Light

Colorful LED Strip Light

Customized LED Strip Light

LED Strip Aluminum Profile

Addressable LED Strip Light

Flexible LED Neon Light

LED Strip Accessories



Follow Us

Copyright ©️ 2008-2019 Shenzhen Ledodm Lighting Co., Ltd | Blog | Sitemap