SP301E SD Card SPI Programmable Pixel LED Controller for RGB Full Color LED Strip Light

SP301E SD Card SPI Programmable Pixel LED Controller for RGB Full Color LED Strip Light

---

Introduction

For addressable or digital led strip, controller is a must to change the lighting modes. There's many different controller for magic led strip, including 3key Mini Controller, IR Controller, RF Controller, RF Music Controller, Bluetooth Controller, WiFi Controller, Bluetooth Music Controller, and other Addressable Controller.

Product Features

• With computer software for editing lighting modes from files in SD card

• Multiple controllers can be work synchronously
  

• Support almost every kind of one-wire or two-wires LED driver IC
  

• Support setting pixel number and segment number, support up to 2048 pixels
  

• With 99 kinds of built-in led strip lighting effects

• DC5V~24V wide range working voltage, reverse power supply input protection

• Support IC SM16703 UCS1903 WS2811 WS2812 WS2801 WS2813 WS2818 SK6812 SK6812RGBW TM1804 TM1914 TM1814 TM1913 LPD6803 LPD8806 SK9822 GS8206 GS8208 TX1812 TX1813 INK1003 APA102 APA105 P9813 P943S P9411 P9413 P9414 P9412

Instruction

1. Notice that the GNDs of controller and led should be connected together.

2. All the 4 output TTL signals are the same

3. Files in SD card must be correctly generated by software "LedSense"

4. Support long distance synchronous mode is using different signal

Four Button

IC: Pressing this button to access in IC-setting mode, press sequentially to switch the IC types

M/S: Pressing this button sequentially to access in file-setting mode or speed-setting mode

UP: In this particular mode, pressing this button to switch IC type, mode, files or speed forwardly

DOWN: In this particular mode, pressing this button to switch IC type, mode, files or speed backwardly

LED Controller for Addressable Digital Magic Progammable LED Strip Light

---