24V 420LEDs/pcs Flexible LED Light Sheets 500*233mm
Description
24V 420LEDs/pcs Flexible LED Light Sheets 500*233mm
Flexible LED light sheet is ideally suited for counter and bar tops, curved surfaces, low clearance applications and situations where exact measurements are not known or likely to change. These flexible, field-customizable light sheets provide extremely uniform illumination behind the translucent material.
Flexible LED Light Sheets Feature
SDCM<3
1LED Cuttable
Bendable and Foldable
CRI>80, Ra 90 Optional
Single Bin LED with Epistar Chip
Cuttable Flexible led light sheet can be cut every one led, allows for on-site customization which can eliminate custom order lead times. When discrepancies occur between drawing specs and field measurements or when changes need to be made, on-site customization avoids delays. | Foldable Flexible led light sheet is easy to fold and shape over edges and around curvilinear shapes. Add a seamless, uniform backlighting effect to translucent surfaces with multiple planes. The flexible circuit board can be bend along both axes and diagonally. | Easy Connection LED flexible sheets interconnect quickly and easily with included sheet-to-sheet connection wires. Connect up to eight sheets in any arrangement, integrated 2-pin connection blocks eliminate the need to solder and speed installation. |
Flexible LED Light Sheets Connection
Cable Management Clips (A): Route the connection wires so that the light from the LEDs is not blocked.
Short sheet-to-sheet Connector (B): When adjacent LED Light Sheets are mounted side-by-side with connection blocks aligned, the shorter sheet-to-sheet connection wires should be used to interconnect multiple sheets. When connecting Light Sheets that are already mounted to a fixed surface, the short connection wires will need to be shaped prior to pushing into connection blocks. Best practices include using two sheet-to-sheet connection wires for all adjacent Light Sheets in each circuit to minimize voltage drop.
Long sheet-to-sheet Connector (C): Use the longer sheet-to sheet connection wires to bridge gaps and/or connect offset sheets.
Power Input Connector (D): Connect it with power supply.
Flexible LED Light Sheets Power Input
Specification
24V 420LEDs/pcs Flexible LED Light Sheets 500*233mm
SDCM<3
Epistar Chip
Double-sided PCB
Cuttable for Easy Usage
| Model No. | SL-2835-420F |
| LED Light Source | SMD2835 |
| LED Chip QTY | 420LEDs/pcs |
| Voltage | 24V |
| Power | 12W |
| CRI | 80/90 |
| PCB Thickness | 2oz |
| PCB Size | 500*233mm |
| PCB Color | White |
| Beam Angle | 180° |
| Tape | 3M 300LSE Tape on the Back |
| Cuttable Unit | 16.67*16.67mm |
| Warranty | 3 Years |
Accessories
24V 420LEDs/pcs Flexible LED Light Sheets 500*233mm
Wire for Flexible LED Light Sheet
Sheet-to-sheet connection wires for aligned 2-pin connection blocks, 20AWG, 60mm length | Sheet-to-sheet connection wires for staggered 2-pin connection blocks, 20AWG, 200mm length | Power lead with connector on one end and stripped on the other end, 20 AWG, 500mm length |
Accessories for Flexible LED Light Sheet
Cable management clips with silicone adhesive backing | Domed spacing bumpers with silicone adhesive backing | Splicing connectors, shunted - use to connect wires with same polarity |
FAQ
24V 420LEDs/pcs Flexible LED Light Sheets 500*233mm
Flexible LED Light Sheets FAQ:
Q: What is the product warranty?
The warranty on flexible led sheet lights is 3 years warranty;
Q: What is the product lifespan?
Our led have been strictly tested and have passed LM80 within an expected lifespan of 50,000hours.
Q: What is color temperature?
Most white lights fall in a spectrum between 1800K and 6500K, measured in Kelvins (K). When dropping below 3000K, the light is noticeably warmer. When rising above 6500K, the lights have a blue-ish tint and cooler tone. We have 2700K 3000K 4000K 6000K for flexible led light sheet.
Q: What is product lumen?
This is one way we can measure light output, the more lumen, the higher brightness. For flexible led sheet light, we use LED with 0.5w 65-70LM.
Q: What does IP meam?
This is a rating system that defines the ability of led strip to be able to work in different environments. It is a measurement of the protection an item will have against solid objects and liquids. An IP rating is comprised of 2 numbers, the first one refers to the protection against solid objects and the second one refers to protection against liquids.
Q: What is CRI?
Color Rendering Index (CRI) is the measurement of how colors look under a light source when compared with sunlight. The index is measured from 0-100, with a perfect 100 indicating that colors under the light source appear the same as they would under natural sunlight. CRI80 and CRI90 are both available for flexible led light sheet.
More Information on LED Strip Lights:
90% of our customers found this page useful in selecting their LED strips